Zhengzhou Brother Furnace Co.,Ltd

Catalogue

Contact US

Room 2713, Floor 27, Building 21, Yard 28, Dongfeng Road, Zhengzhou, China

TEL: +86-371-67973830

FAX : +86-371-86106036

Mob: +86-13733835594

Email: sales@brofurnace.com

Zirconia Sintering Furnace

Zirconia Sintering Furnace

CE certificated Zirconia Sintering Furnace
Max temperature:1700℃
Working temperature:1600℃
Chamber size: Dia100xH100mm

    Zirconia Sintering Furnace
    This Zirconia sintering furnaces is perfectly suited for sintering zirconia crown. The special high purity Molybdenum disilicide heating elements offer best possible protection against chemical interaction between charge and heating elements. The zirconia crown are positioned in ceramic sintering trays. Up to three sintering trays can be stacked into the furnace.

    FEATURES:
    1. Max temperature: 1700℃
    2. Working temperature: 1600℃
    3. Automatic program for heating, platform moving. It's very convenient for dental crown firing.
    4. Touch screen panel which can store 500pcs different programs
    5. 30 programmable segments for precise control.
    6. Built in protection for over-heated and broken Thermal couple.
    7. 6pcs high purity MoSi2 heating element can achieve 30℃/min fast heating rate.
    8. 1 year limited warranty (Consumable parts such as thermocouple, o-rings and heating elements are not covered by the warranty, please order the replacements at related products below.)

    Certifications 

    chamber size

    Dia100xH100mm

    Max. temperature

    1700 ℃ (<2hour)

    Working temperature

    800-1600℃

    Temperature controlling

    ●  PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
    ●  Touch screen panel which can store 30pcs different programs 
    ●  Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
    ●  Over temperature protection and alarm allows for operation without attendant.

    Temperature accuracy

    ± 1℃

    Temperature Uniformity 

    ± 5℃

    Heating rate

    0-30℃ /min

    Thermocouple

    B type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube

    Heating element

    U type MoSi2 heating elements

    Furnace Chamber

    Three layers of ceramic fiber insulation materials 
    ●  First layer: 1800℃ ceramic fiber board 
    ●  Second layer: 1600℃ ceramic fiber board 
    ●  Third layer: 1260℃ ceramic fiber board 

    Furnace structure

    Double layer steel casing with dual cooling fan, surface temperature below 60℃

    Furnace door

    ●  Elevator opening with platform
    ●  Power cutting off when furnace door open 

    Outer dimension

    About 550X420X810mm

    Working voltage

    220V, 50HZ/60HZ, 1 phases (As per your order)

    Rated power

    2KW

    Weight

    Net Weight: about 90kgs
    Gross Weight: about 110kgs

    Warranty 

    ●  One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
    ●  ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.

    Certifications

    20160914114324.png

    Application Notes

    Using Attentions

    ●  Cooling rate shall also not exceed 10 °C /min.
    ●  Toxic or explosive gases are not recommended for use with this furnace without necessary safety 

    controls and supervision.
    ●  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal 

    occurrence and the cracks may be repaired with alumina coating.
    ●  Refractory door block must be inserted before closing door.

    Optional Spares

    1800 type MoSi2 heating elements

    20160914114324.png

    B type thermocouple

    20160914114357.png

    Sinterinng trays

    20160914114419.png

    Zirconia beads

    20160914134221.png


Related Products
Inquiry